Email support
syjx@shengyangringrollingmachine.com
2026-03-01
The other day I was looking for an old Chinese square baler for one farm - I was surprised at how unobvious it turned out to be. Many people immediately go to popular sites, thinking that everything is there, but in fact they come across either completely dead equipment or resellers who themselves do not know what they are selling. Chinese presses, especially those that were produced 10-15 years ago, are a specific thing. It’s not that they are bad, but you need to look for them with an understanding of what you are looking for.
This is not an idle question. New ChinesebalersNow, in general, they are not bad, but the price is steep, and you often have to wait for spare parts. Old models, especially those that were copied at one time by Claas or Welger, worked like clockwork if they were serviced on time. The metal is thicker, the design is simpler. But here comes the main catch: such cars are rarely put on public display. They are usually passed from hand to hand. within regions, through familiar machine operators or former dealers.
I saw the story myself: in the Voronezh region there wassquare balerShenli (if memory serves, model SL-525), 2008. The owner thought that it had already served its purpose, but when they opened it, apart from worn belts and one bearing, no problems were found. We bought it for pennies, brought it back to life, and it worked for three more seasons without failure. But to find such a copy, I had to call half the region - there is not a word about it on the Internet.
Hence the conclusion: you need to search not only on the Internet, but also through word of mouth. Often, old Chinese presses gather dust on the backyards of farms that have switched to roll-fed models, or from small dealers who once imported them and now don't know what to do with them. The key is to know the models that are worth looking for: the same Xingtai, Yulong, some early series fromShandong Shenyang Mechanical Equipment Co.,Ltd. By the way, on their website https://www.shengyangjxgroup.ru they sometimes have remnants of old batches or used equipment, which they accept for trade-in. But you need to seize the moment.
I'll start with the obvious: Avito and other boards. It's there, but it needs to be filtered very strictly. Often labeled as ?Chinese baler? they sell anything: from homemade products to relabeled Russian units. The first thing I do is ask for a photo of the nameplate and the bale formation unit. If there is no nameplate or it is painted over, there is immediate suspicion. The Chinese have always put up nameplates, albeit in their own language. The model number is what matters.
Another channel is specialized forums for machine operators and agricultural producers. Not the ones with advertising, but where people discuss breakdowns and exchange spare parts. Information often comes up there that “the neighbor has an old Chinese press, it’s not needed?”. Personally, this is how I found a used Yulong press in the Krasnodar region: I wrote in a thread about problems with a needle bearing, and in response I received an offer to sell the entire machine.
Local agricultural enterprises that are renovating the park should not be discounted. Sometimes they write off equipment not because it is broken, but because they switched to a different type of cleaning. Calling directly works. I once asked at one of the bases in the Rostov region if they would sell the old onesquare baler, which stands in the corner of the hangar. It turned out that they would sell it, and with a set of spare parts. But there was no announcement about this anywhere.
If you find a candidate, inspection is a different story. CChinese balersthere are nuances that are not always obvious. First, I check the bale chamber for “fatigue.” metal It happened that, due to low-quality steel, microcracks appeared in older models in the area of greatest pressure. This is especially true for presses that operated on wet straw.
The second is the strapping knot. Old Chinese presses often had mechanical components that required precise adjustment. You need to look at the wear of the cams and guides. If possible, ask to tie several bales - but rarely does anyone allow this without prepayment. Therefore, you often have to rely on indirect signs: uniform wear of parts, traces of repairs.
Third - hydraulics and gearbox. It is best here if the documentation or nameplates on the components have been preserved. The Chinese used to often install gearboxes of their own production, which are now hard to find. If you have, say, a gearbox from Dongfeng or a Bosch pump, this is a big plus. Spare parts for them can still be found. I remember that because of a burnt-out gearbox on the Xingtai press, it had to be written off - they couldn’t find a new one, and adapting another one was more expensive than the machine itself.
This is perhaps the biggest headache. Even if you find an old onebalerin good condition, the question of spare parts remains open. Many manufacturers, especially small ones, have not existed for a long time or have changed their model range. Therefore, before purchasing, you should immediately take the trouble to find the key components: the same pressing plates, pins of the strapping mechanism, belts.
The company that once supplied this equipment can help here. For example,Shandong Shenyang Mechanical Equipment Co.,Ltd, as a high-tech enterprise, often keeps archives on old models and can suggest analogues or even have leftovers in stock. Their website https://www.shengyangjxgroup.ru is worth checking periodically - sometimes they post lists of available spare parts for discontinued lines. But again, this is not a guarantee, but rather luck.
From personal experience: I couldn’t find a camera drive shaft for an old Yulong press from 2010. I contacted several dealers, and in the end a mechanic I knew helped, who said that the shaft from the newer Jinma model fits with minimal modification. I had to sharpen the seat, but it worked. So sometimes the solution lies in ingenuity and understanding of the design, and not in official catalogs.
Search for oldChinese square baler- an activity for those who are patient and a little adventurous. You can spend a month and find the perfect option for a reasonable price, or you can stumble upon a “pig in a poke?” The main thing is not to be fooled by too low a price and always look at the car in person. Photos and videos often hide critical flaws.
Is it worth it? If you need to cover the need for an inexpensive but working unit for several seasons - yes. If you are planning long-term work, it may be better to consider options with support, the same used European presses, albeit more expensive. But for many households, the old Chinese is the golden mean.
Ultimately, the success of your search depends on how deeply you immerse yourself in the topic. Knowledge of models, weak points, ability to “read” traces of exploitation are what distinguishes a successful purchase from a distressed asset. And yes, sometimes it’s worth just leaving a request on a site likeshengyangjxgroup.ru— suddenly they have the same abs you’re looking for lying around. Checked: this also happens.
