Email support
syjx@shengyangringrollingmachine.com
2024-10-09
Introduction to the advantages and main components of our ring rolling machine
3. Mechanical part
The ring rolling machine consists of a main roll and a core roll, which are rolled in the wall thickness direction, and a tapered roll, which is rolled in the height direction.
Holding rollers that form the shape, sizing rollers that measure the outer diameter of the rings, and welded structural frames that support those rollers in the pit.
Consists of main motor, reducer, etc.
1. Lathe bed: It is welded from high quality steel sheets and annealed after welding to eliminate the internal stress of the bed. The bed guides are made of high quality
The steel undergoes heat treatment and has increased wear resistance.
2. Main gearbox: The main gearbox adopts a reducer manufactured by a professional factory. An independent lubrication system with a thin layer of oil is used. The output shaft passes
The standard clutch is connected to the main roller shaft and has the advantages of compact structure, stable performance and large load-bearing torque. On the main gearbox
Square with a device for collecting wastewater and scale for waterproofing. The gearbox and motor are mounted on a stable base.
4. Electrical system requirements
1. The electrical system has overcurrent and short circuit protection devices.
2. Electrical components are Delixi branded and have reliable quality.
3. Equipped with an independent electrical cabinet equipped with air circuit breakers, relay contactors and other electrical appliances.
4. The main motor is controlled by the soft starter cabinet.
5. Operating mode: manual control of reversing valve;
